Product InformationDEP 2 stroke pipes are produced from high quality CR1 grade, mild steelmaterial. Ranging from 0.9-1.2mm, depending on the model and purpose.The 2 stroke stampings are produced through our own deep drawerprocess, using CNC cylinder mounts, in-house laser cut mounting bracketsand fabricated with high quality TIG and MIG welding. All models areavailable in the bare metal factory finish and nickel finish. Our 2 strokepipes have been designed to improve performance over the OE pipe within-house DYNO and track testing.
WARNINGDuring use exhaust systems get hot. To avoid danger of burning, do notremove or touch until adequate cooling time has been allowed.
2 Stroke Pipes Fitting InstructionsFit pipe loosely to mounting points – only after fitting silencer should fixingsbe tightened. This product is designed only for the machine(s) stated onthe label. Some pipes are produced with flat areas to provide frame,engine and water hose clearance. Other flats can be added to ensureadequate clearances. In the event of fitting difficulties, notify supplyingdealer. The dealer or manufacturer can take no responsibility after the pipehas been run on the machine.
Jetting InstructionIt is advised to run the bike for five minutes under normal riding conditionsand check the spark plug. The spark plug tip colour should be a biscuitbrown, if it is white or black/oily you may need to make some jettingchanges. Contact your local dealer for advice.Advised jetting changes for this model: Use stock jetting.
All info here!
